我們都知道山東橋架是由兩個縱向的側構件組成，由獨立的構件連接。橫向構件和提供固體側軌保護和系統強度與平滑半徑配件和廣泛的材料和完成選擇。材料：鋁，鍍鋅鋼，鋼HDGAF，不銹鋼。

　　We all know that Shandong bridge is composed of two longitudinal side components, which are connected by independent components. Transverse components and provide solid side rail protection and system strength with smooth radius fittings and a wide range of materials and complete selections. Materials: aluminum, galvanized steel, steel HDGAF, stainless steel.

　　溝道電纜橋架

　　渠道電纜托盤由一個整體、通風或實心底部通道部分組成，提供一個經濟的支持電纜下降和分支電纜運行從可倒置托盤系統。通常用于安裝有限數量的電纜時，它是不可取的，并支持單電源電纜或多個控制或信號電路電纜。支持頻率，短到中支撐跨度為5至10英尺。MPHusky通道電纜托盤為通風或實心底，深為1-1/4“至1-3/4”，寬度為33“、4”或6“。其體積小，便于周圍定位和連接設備。渠道電纜托盤可分為以下幾種材料類型：鋁、鍍鋅鋼，HDGAF鋼，不銹鋼。

　　The channel cable tray consists of a whole, ventilated, or solid bottom passage.Provides an economical support cable drop and branch cable operation from the invertible pallet system. Usually used to install a limited number of cables, it is not desirable and supports a single power cable or multiple control or signal circuit cables. Support frequency, short to medium support span of 5 to 10 feet. The MPHusky channel cable tray is ventilated or solid, with depths of 1-1 ≤ 4 "to 1-3 × 4". The width is 33 ", 4" or 6 ". It is small in size and easy to locate and connect the equipment around. Channel cable pallet can be divided into the following material types: aluminum, galvanized steel, HDGAF steel, stainless steel.

　　槽式電纜橋架

　　由縱向側構件內包含的通風或實心底部組成。提供通風增加電纜支持頻率和底部配置提供電纜支持每4或更少英寸。可用于金屬和非金屬材料。一般用于控制和儀表電纜的中等熱發電應用，短到中支撐跨度為5英尺至20英尺。槽式電纜托盤底適用于平板或波紋，其強度是平板的3倍，剛度是平板的21倍。

　　連接段之間的波紋接縫消除了對底縫接頭的需要。載荷深度：3“至9”材料可提供：鋁，磨機鍍鋅鋼，鋼HDGAF，不銹鋼，鋁或鋼，并滿足NEMA 8A至20C+‘。

　　It consists of a ventilated or solid bottom contained in the longitudinal side member. Provide ventilation to increase cable support frequency and bottom configuration to provide cable support every 4 or less inches. It can be used in metal and non-metallic materials. Medium thermal power generation applications commonly used for control and instrument cables, with a short to medium support span of 5 feet to 20 feet. The bottom of the slot cable tray is suitable for plate or wavy, its strength is 3 times that of plate, and its stiffness is 21 times of that of plate.

　　The wavy joint between the connecting segments eliminates the need for the bottom seam joint. Load depth: 3 "to 9" materials available: aluminum, mill galvanized steel, steel HDGAF, stainless steel, aluminum or steel, and meet NEMA 8A to 20C ≤'.

　　單軌電纜橋架

　　輕負荷電纜支持項目，不需要傳統的雙面軌道?？焖匐娎|支撐系統的安裝和提供自由電纜進入和退出系統。單軌電纜托盤一般用于低壓電力電纜安裝，其中電纜自由、側填和安裝速度是影響因素。

　　Light load cable support project, no need for traditional double-sided track. The installation of fast cable support system and the provision of free cable entry and exit system. Monorail cable tray-generally used for low voltage power cable installation, in which cable freedom, side filling and installation speed are the influencing factors.

　　總的來說山東橋架類型是豐富多樣，以上盤點的只是其中一部分，希望對大家了解電纜橋架有所幫助，還有什么不懂的歡迎來咨詢我們。

相關文章：山東橋架